E3 error code: Turn the machine off and then on. Enter the Service Mode by pressing the Chime and Exrta Rinse keys for 3 sec. Display the Diagnostic Codes by pressing the Rinse and Spin key. Clear the
...error message There have been problems with the motor wire harness connector on these washers. The problems are either a loose or bent terminal in the molex connector. Unplug the connector and tug on ...
E3 error code: Turn the machine off and then on. Enter the Service Mode by pressing the Chime and Exrta Rinse keys for 3 sec. Display the Diagnostic Codes by pressing the Rinse and Spin key. Clear the
Question about Beko Washing Machines
...water and then end the programe. This error code is below. Good luck to you: E3 Constant heat Check wiring Check control board relay for heater from website: ...
185 questions posted
Usually answered in minutes!
2,979 Questions
1,498 Questions
358 Questions
175 Questions
151 Questions
