Panasonic DVD-LX97 Portable DVD Player "lubricate slide drive" Questions

HELP PLEASE I WANNA WATCH A FILM BUT I CANT IN MY CAR DVD PLAYER WHEN I INSERT A DVD IT STARTS SLIDING THE DISC INTO THE PLEYER AND IT JUST RETURNS IT THE MOTOR SEEMS TO BE WORKING IN IT OK BUT THE ...

...slide the panel to one side. Unplug cables between the front panel and the interior. Remove any screws securing the front panel and remove the panel. If it won't move, check beneath it for clips ...

...slide the panel to one side. Unplug cables between the front panel and the interior. Remove any screws securing the front panel and remove the panel. If it won't move, check beneath it for clips ...

slide along and move the laser reader from the near inner area of the disc towards the outer edge. In most portable DVD players, the laser lens would be visible as well as the slot it moves along. The

Slide Rails Are Well Lubricated, There Is No Traction Resistance Through The Motions. All Ribbon Cables Are Connected Properly, Both Standard And Micro Inside The Drive Itself. Again, The Unit Is APEX

I have a Pioneer DV 401V K dvd player. The problem is when I load a DVD the tray slides in and the disc starts spinning and the LED readout says "Loading". It goes on like this for a few ...

...slide switch of some sort at the rear of the unit; 3. check if there may be a pinhole somewhere along the bottom of the loading tray where a blunted point safety pin maybe inserted; 4. open the top ...

H03 Error How to fix a Panasonic DVD LX-97 H03 error This problem is the laser optics in the wrong position. Try to move it carefully by hand to the left near the spindle. It may be stuck on the right

...slide the panel to one side. Unplug cables between the front panel and the interior. Remove any screws securing the front panel and remove the panel. If it won't move, check beneath it for clips ...