...seal has broken under the blade. Where can I get parts in Canada HELLO there are two possible solutions 1 change seal or 2 change seal and blades in order to improve the life or your blender. bye j ...
Question about Blenders
...sealing washer in the wrong place. I have no idea what model/brand you have but on most blenders the rubber seal will go between the beaker and blade assembly, not the blade assembly and the
Question about Breville Blenders
...seal has worn out, or the blenders blade shaft is worn and wobbling. Try cleaning all parts in alcohol to soften the seals. Rebuild kits and replacement blades can be found here ...
...seal cannot be replaced since the chopping blade and shaft are permanently fastened together. Your only recourse is to buy a new blade assembly which should be available. I would search for it with ...
...blade seal i would like a blade seal for russel hobbs table blender model code 14449 Are you in the UK? If so, I got hold of replacement parts for my russell hobbs hand blender ...
...seal and or bearings? If it is not the HUGE blade retaining ring under the beaker a bit loose then you will be buying new parts to repair it. The only other possibilities are beaker cracked and ...
...blade assembly. It was filled with liquid and all liquid leaked out the bottom onto the counter top. Siobhan clean and tighten blade --if still leaks replace seal or need replacement base if ...
seal between the beaker and the blade carrier is in the wrong place it can raise the blade drive to not engaging properly with the motor coupling. The gasket goes between the jar and the blade carrier
...blade. make sure the seal is replaced with the blade and the collar is screwed back securely. See this link for the parts of the blender. CUISINART CANADA SmartPower Premier 600 Watt Blender CBT 500C ...
8 questions posted
Usually answered in minutes!
42 Questions
13 Questions
4 Questions
