DeLonghi Pinguino PACL90 Portable Air Conditioner "leaking" Questions

air conditioning unit leaks My Mitsubishi Electric Mr. Slim leaks after about 30 minutes hi there, there no other way to repair that leaks other than you call an ac technician from service center and ...

...causes the freeze. Cost to fix is a guess depending on where it is. If the evaporator is what is leaking, you probably have to buy a new one and it'll be $1500-$2000. If an excessible line is ...

I have a Pinguino PAC 190 floor model that blinks PF what does that mean? PF- error code means shor of gas/gas leak. It's not advisable to charge gas without finding out the leak. To find out leak, ...

My a/c (24000btu) refrigerant gas leak after about 2 month always. There is no visible gas leak place to see. But always every two month after receiving no cool from a/c the repairman says all the gas

puron leak 23 mon old airconditioner leaking puron. 5 service calls, sniffing for puron negative cannot find. Now local company wants to replace coil. Leak test initially not positive but now after ...

ceiling leaks There is a water leak from the ceiling vent that contains the coil, pan, etc. I sealed the pan with epoxy and putty. I also cleaned the sink drainage tube with a wet vac and replaced the

I need to find a leak in my Carrier Air Central Air cond. I'm thinking it may be the A-coil as it keeps freezing up. Can I use compressed air and soap/water spray around the A-coil to check for leaks?

I have a coleman evcon suncutter unit that is just for a/c. It works fine except it does not blow cold. I've had the repairmen out here to look at it and they have looked for leaks. Their ...

My 1990 Penguin unit has a leak. Can it be fixed? My 1990 Dometic Penguin unit has a leak. Can it be fixed? Leaks can be repaired, some quite easily and others while difficult to find - and get to - ...

true frezer is loosing charge in 3 days cant hear leak with nitrogen and has dye in it but looses charge in 3 days what is the best way to find the leak Hi, be sure you are putting enough pressure ...