...remote wire won't power on amp sony mex Stereo remote wire won't power on amp sony mex bt2900 The easiest check is unhook the remote turn on wire from the amp and use a small jump wire to bridge ...
...amp Hi if you have a amp the blue remote wire goes to the remote turn on terminal or wire on the amp. If you do not have an amp, cap the remote wire you will not need it. Thank you for using ...
...remote wire to the amp. Alpine has two remote wires. BLUE (only) This is the pwr antenna remote wire,every time you insert a cd this remote wire,the pwr cut out. BLUE/WHITE STRIPE This is the AMP ...
...remote wire is to be hooked up to it and where it goes. coming from my aplifier on the back of he cd player is the wire harnest there should be a SOLID blue wire on there take the remote wire connect ...
Question about Kenwood Car Audio & Video
...remote wire to the battery to test them and they worked fine. I then tried to run the remote wire to the back of my head unit and that did not power the amp. So I spliced the blue/white wire in the ...
...remote wire for a amp for subs there is a blue wire on back of deck with white stripe thst is the remote hook a wire to that and run to amp plug in to remote on amp and there you go i hope this helps ...
remote wire for your amp. The solid blue wire is for triggering on the power antenna and does not supply voltage in CD or AUX I just had the same thing happen to my friend's car. More than likely your
Question about Kenwood Car Audio & Video
...remote wire on head unit to work? Buy a cheap 12v circut wire tester and see if your getting juce from the remote wire. Also check fuses. If no juse just tap the radio acc wire and run it to the ...
...remote wire for my amp so i ran the remote wire to the yellow wire it was on all the time until i hooked up a toggle switch. but now the yellow wire seems to not be working. I'll try hooking the amp ...
...remote wire from the amp to the remote on the stereo, when the stereo is turned on it will in turn power the amp and subs up. Second would be run a wire from the remote on the amp and another wire ...
24 questions posted
Usually answered in minutes!
100 Questions
69 Questions
39 Questions
37 Questions
25 Questions