Question about Maytag Neptune Washing Machines
...clunk when the tub turns. Today, it started doing short pauses during the spin cycle (almost like the belt is slipping momentarily). Any ideas what's going on? ...
Question about Maytag Neptune Washing Machines
during spin/ but not soloud like brg's.. **** . The drum shaft bearings may be bad. Try to lift up on the drum while turned off, if the drum moves with a 'clunk', that may be your problem. If the drum
Machine quits during the spin cycle My 3 year old Maytag Neptune TL runs fine empty, but with a load of laundry, the machine quits during the spin cycle. There is a clunk and bang, then a code "cd" ...
Question about Maytag Neptune Washing Machines
LG front-loading washer during spin cycle makes loud clunking noise and burning smell During spin cycle makes loud clunking noise and burning smell BALL CHANGE DRUM WASHING MACHINE
clunks and grinds during cycle. What could it be? Could be worn drum bearings. MY MACHINE WAS DOING THE NOISE THING TOOK APART THE FLYWHEEL IS SLIPPING ON THE SHAFT, WILL NEED TO SHIM WHEEL OR REPLACE
Question about Amana Washing Machines
...Washing Machine does not Pump or Spin http://www.fixya.com/support/r4617986-washing_machine_not_pump_or_spin If you are having problems with your front load washing machine then checkout this tip... ...
...clunks The washer runs fills, drains and spins. During the wash cycle the agitator does not agitatecorrectly, but moves and makes a clunk-clunk noise there is a gear, pop the top cap off the agitor, ...
during spin My front loader is making a horrible banging, clunking noise when it is spinning in high speed. Only happens on normal wash cycle, not on perma pressed. Any ideas?? Wayne see if the shocks
...during the spin cycle. All that happened is the water drained and filled, while the motor just hummed throughout each cycle. So am I having a problem with the motor, transmission/clutch or could I be ...
...machine only agitates and drains but does not spin. belt OK. Was recently making unusual noises (clunking) during the agitation operation. Transmission issues ? Hello,whatever the model, check filter ...
468 questions posted
Usually answered in minutes!
2,979 Questions
1,498 Questions
358 Questions
175 Questions
151 Questions