Question about Maytag Neptune Washing Machines
rock tumbler or something. Will resstart on any cycle but will just go back to the gravel sound within 60 seconds or less. you have stripped a gear. I hope it is under warrenty if not you will need to
...RH. Make sure you reseat the clutch properly on re-install. I had to place the belt back on and rock it back and forth to re-seat on the shaft. Without removing the tub, it's a tight work space. ...
Question about Maytag Neptune Washing Machines
in clutch hub. 5. Replace Clutch plastic cover with 4 screws. 6. Reseat clutch on spinner shaft and rock back and forth while lifting clutch with upward pressure to reseat clutch. When seated properly
Question about Maytag Neptune Washing Machines
...rock solid and slip you get tumbler movement as the wash basket begins to spin up. This causes the wash basket load to go off balance and if the TDS is working properly it?s signal input to the ...
...times will show up a uc or dc light at the spin cycle and will make very loud noises along with a rocking vibration while spinning. Also, I have noticed small holes in our clothes. I do not know if ...
Question about Washing Machines
...rock back and forth second your pump is the most likely culprit if you look in side the washer you will see a seem in the tub next to that will be one of the washer tumblers take the screws out of ...
468 questions posted
Usually answered in minutes!
2,979 Questions
1,498 Questions
358 Questions
175 Questions
151 Questions