Maytag Neptune Washer "not start cycle" Questions

Maytag Neptune Leaking From the Door My wife started a wash cycle and during the cycle the door opened up and the water just came pouring out ! Looks like the bottom corner is not shut all the way, ...

...I put in white wash and now it's stuck on the wash cycle and will not go any further, it just starts and then stops starts and stops, no water running thank god. Drain the water off then try ...

...start off the cycle because there are errors due to feedback from the inputs. For the program to start up the main program controller must initiate the INLET/MOTOR/DRAIN pump/ valve to open up and ...

...cycle because of it You will need to replace your timer control. John My topload Maytag Neptune TL Washer will ONLY change between "whites", "delicates" or "bulk load"...but will not start any of ...

...start a cycle normally, but after the timer reaches a certain point it stops counting down and the machine will continue to agitate until you force it to stop. Thank you for verifying the model type ...

...water out and there are no kinks in the drain hose if I take the wet clothes out and continue it starts to drain and goes back to a rinse cycle and puts more water in. vicious cycle it is. Try ...

Door not locking nor spin cycle not working The door does not lock when the washing starts. Also the washing machine will go through all the cycles and finish the wash however the clothes are still ...

cycle, there was a smell of something burning (electrical) . Motor problem?? The motor is known to have bad windings. Do a search for "Neptune Washer will not start" Also just inside the control panel

spin cycle does not engage When the normal washing cycle is engaged, the spin cycle starts but stops suddenly as the barrel begins to accelerate. Error message to contact service center. Attempted a ...

start of a Spin Cycle of that Wash Cycle which Wash Cycle did you have selected? Are there any error codes to the LED display like dC or uC? If you stop that wash cycle with the wet load and do a Spin