...using Hot water wash let your machine run through a wash and rinse cycle. The vinegar will cut through suds .. also wipe down the rubber gasket with a 1/2 vinegar /water solution to clean the ...
...rinse cycle with some milk mixed in with the water, (pour the milk into the soap container, about one cup) and make sure there are no soap suds left in the machine. Check that you are using washing ...
...rinse" lets water into the tub to rinse out any remaining soap. Check to see how long it rinses for. If it is very briefly (a few seconds), there might be a problem with the timer or the ...
...water and need low-sudsing soap. Most all brands now sell this "h.e" soap. What has happened is that suds have travelled up the tube to your pressure switch and have told the washer's computer that ...
...rinse cycle - no luck this time - called Fisher - they suggested it was soap buildup on the outside of the tub and suggested phosphate soak & wash which did not help - also not excess of soap use ...
...rinse and spin and use less soapwhen u wash I use 200 gms or 200ml of front loading wash powder, approximately. The measure is on the supplied plastic measure. No liquid soap solution. This is a 5 or ...
...rinse cycles are in cold water. Is your cold water valve screen plugged causing your washer to rinse poorly? Are you using the HE detergent? If not maybe the washer is sudsing up to much and having a ...
Question about Washing Machines
...water in the machine. Reconnect, do a rinse and spin. It is the pump, or the motor analytics that creates this error. Or Wipe the interior of the drum with a clean, dry cloth to remove excess soap ...
Question about Whirlpool Washing Machines
...rinse cycle it put up "sud" and a few seconds later it had a F21 code come up and now it acts like the pump is working but it just runs and doesn't pump any water out and there is about 1/4 the tub ...
23 questions posted
Usually answered in minutes!
2,979 Questions
1,498 Questions
947 Questions
680 Questions
658 Questions
