...valve solenoids are probably faulty. You can check the solenoids with a multimeter to see if they are faulty. Here is a picture of the water inlet valve assembly. Hope this helped and best
...valve solenoid is probably faulty. You can check it using a multimeter or ohm meter for continuity to see if it is faulty. The solenoid is most likely faulty on the cold water side. Here is a picture ...
...valve bobbin was the bad part, and that the solenoid was okay. But...since Maytag/Whirlpool only sells the whole thing, he had to change the assembly. You might be able to take the solenoids off and ...
Question about Kenmore Washing Machines
...solenoid on the water inlet valve. Here is a picture. The solenoid can be checked with an ohm meter or multimeter. If the solenoid reads zero ohms, it is stuck open and the inlet valve must be ...
...solenoid has failed and the inlet water valve will have to be replaced. This unit appears to have 2 inlet water valves one for hot and cold and one for just cold that is used for ...
...solenoid and some water will squirt out. Turn it rightside up and see if the valve seals itself. Repeat if necessary. Repeat on the other inlet. In the picture you can see the leak coming from the ...
...solenoid on the cold water side of the water inlet valve for continuity using a multimeter. A lack of continuity indicates a faulty solenoid. I am attaching a picture for reference. Let me know if ...
...solenoid has failed and the inlet water valve will have to be replaced. This unit appears to have 2 inlet water valves one for hot and cold and one for just cold that is used for diluting soap. You ...
...solenoid valve and see if it is stuck open. It should be near the drain outlet. Measure the power at the drain solenoid. It should be 0 volts when the washer is filling. If there is power there (AC ...
Question about LG Washing Machines
...valve on my washing machine and I forgot to take a photo of the wiring connection. I thought that they would have the sense to make it fit only 1 way. there is only 2 wires on solenoid valves it ...
41 questions posted
Usually answered in minutes!
2,979 Questions
1,498 Questions
947 Questions
680 Questions
658 Questions