... tighten pump-drive mechanism 3.suds lock----remove suds,, add cold water 4.faulty transfer valve---replace 5.defective timer----replace 6.loose belt---adjust belt No agitation 1. Motor ...
...them and drumbearings - is it worth replacing them and does the rear drum assemblyl have to be replaced? Spin bearing replacement is quite a big job..You may also have to replace the shaft which ...
Question about Kenmore Washing Machines
how do I replace kenmore elite 110.45081400 bellow? The replacement part came with no instructions. I need to replace a leaking bellow and have the replacement part from searspartsdirect. However, it ...
...does it mean its a samsung Samsung Dryer Fault Codes tsThermistor shortCheck for restricted vent. Replace thermistor toThermistor openCheck for restricted vent Replace Thermistor doDoor OpenCheck ...
...seal. It could also be a hole in the tub. If a hole in the tub is the problem, it's usually best to replace the washer. Most leaks can be eliminated by tightening water connections and replacing ...
Bearings Replacement The bearings on my Hotpoint WMA66 have expired and I have been weighing up the odds between replacing the bearings or binning the appliance. I have had a few quotes for the work ...
...Water not pumping out fast enough. Refer to test (3). E23 Drain pump relay on control board failed. Replace control board orwire. E24 Drain pump relay on control board failed. Replace control board ...
Question about Washing Machines
Please can u suggest a direct suitablee replacment to fit Integrated Ariston BC312 model My ariston needs replaced so need a direct replacement model - and is the Ariston a 60/40 or 70/30 fridge ...
fast enough. Refer to test (3). E23 Drain pump relay on control board failed, wire off pump or pump Replace console control board, wire or defective. pump. E24 Drain pump relay on control board failed
72 questions posted
Usually answered in minutes!
2,979 Questions
1,498 Questions
947 Questions
680 Questions
658 Questions
