...hose. Check the belt on the beater bar sounds like you got trash at some point that stopped the bar causing a flat spot on your belt. Also check your connections to make sure they are tight and ...
...vacuum, with hose and power nozzle, to an authorized Aerus Electrux service shop. They can try a new hoze to see if that's the problem. If there is a break in the wiring, the hose is probably worn in ...
...tight. Can you help me ? Hi there, If you're having trouble removing the wand from the cleaner, the hose may have been twisted the last time you replaced the wand on the machine after use. ...
...vacuum is running, and then check your power hose and wand for continuity (checking for a broken wire) while the hose is disconnected from the canister. If all this checks out and the power nozzle ...
Question about Electrolux Vacuums
...you have a worn latch, check for a replacement. One certain models you can move the connector closer to the hose opening. For the most part it needs replacement, there are few fixes for this ...
replacement parts for mine (Model 11625813506) here: http://www.searspartsdirect.com/partsdirect/getModel!retrieve.pd?modelNumber=11625813506&pop=flush Rather than pay $10 for a new cover terminal
hose from the other vacuum and putting it inside the lower hose, or the suction port behind the brushes while you're pushing with the screw driver will also many times dislodge the obstruction easier.
...vacuum hose, bad motor, full vacuum bag, or cracked or damage hoses. Purchasing a vacuum cleaner can be a costly expense while repairing the suction on the unit can be virtually free. Most suction ...
...vacuum and set it aside. 5.Pull the end of the hose from the hose tube rack. 6.Twist the other end of the hose from the dirt duck tube.Remove the hose. 7.Unscrew the back of the handle.If you ...
221 questions posted
Usually answered in minutes!
184 Questions
178 Questions
89 Questions
74 Questions
69 Questions