Maytag SAV4655A Top Load Washer "remove older washing" Questions

...washed several paperback book in my older model whirlpool top load washer. Can the agitator be removed? I accidentally washed some paperback books in my older model whirlpool top load washer.

...REMOVE THE ROCK AND PUT BACK TOGETHER. NOTE: IF THIS IS AN OLDER UNIT THE AGITATOR MAY BE SEISED TO THE SHAFT IN THAT CASE LEAVE THE ROCK IN THERE. THE CHANCES OF GETTING THE AGITATOR OFF OLDER UNITS ...

...remove ge profile top loader washing machine motor taken off front removed drive belt and motor mount nuts how old is this washer i have worked on the older ones if you can send me a pic i can advise ...

...it will not drain pump may be pluged with lint remove bottom panel..new style pump remove 3 torx screws from bottom to clean older style may be able to unclip from motor and clamps and remove to ...

Older Style Top Loader Washing Machines I am trying to find a diagram on how to replace the V-Belt on our washing machine. if the image on your posting is correct and model number 2 there is no belt ...

...the control by using a putty knife to release each end. Older models had a screw that needed to be removed, not so with the newest ones. The switch has 2 hot wires and a ground wire. Jump them 2 hot ...

...older whirlpool front load washer Clean the pump filter screen.... Remove bottom front panel see filter housing located next to pump unscrew cap by turning counter clockwise... Clean/remove debris ...

...older style ge washing machine and i have only replaced a pump on a beltless style .. I am not sure how to proceed .. I have the hoses off but do not want to mess anything up. any tips? loosen the ...

...remove the drum to clean it. Regards, Glenda The white washing is also greying. I have tried all the other recommended ways of cleaning, to no avail. If you wish to get some details; check the site ...

older models. Check EBAY as well, sometimes you can find hard to find parts for pretty cheap. Replacing the timer shouldnt be that hard. UNPLUG the unit, remove the console, which should be held on by