...unplugged providing the fill valves/ water is okay....If it keeps on filling after unpluged then sounds like faulty fill valve,if on the other hand it fills without stopping when plugged in then its ...
Wshing machine keeps filling with water Washing machine keeps filling up with water on all settings even the drain setting You probably have a stuck fill valve. This is the part where the hot and cold
water level Won't stop filling with water Probable causes: Faulty water inlet valve - unplug washer, if water continues to fill replace the valve. Water level switch, hose or dome faulty - service the
My Kenmore washer will not shut off the hot water at the end of the fill cycle Water valves work on a hydraulic principle, the surface area of the valve where the water comes to the valve is more than
...machine is unplugged. Leaks on floor also under machine. The freezing messed up the fill valve. This is the part that your hoses connect to on the back of the washer. Replace it and you will be
filling up with water when not in use Something is stuck in the fill valve, or you have timer problems. To test: unplug the machine, unplug the wires to the fill valves, (mark which goes where). Plug ...
Asko W6324 over filling The cycle starts and the water starts filling in the machine, but it never stops filling when it's supposed to. It will eventually fill up to a point where an auto detection ...
...or continues to fill. no fill If it stops when unplugged. Then it is not a water inlet problem but an electrical signal problem going to ur water inlet valve. Possibly from the panel or
...a bad water inlet valve try unplugging machine and see if it still does it? if it doesnt do it when unplugged then u have an electrical signal problem from eiither control board or timer if it keeps ...
434 questions posted
Usually answered in minutes!
2,979 Questions
1,498 Questions
947 Questions
680 Questions
658 Questions
