...lint trap on the front loader Where is the lint trap on the Kenmore front loader washer? There is no lint trap. There is a coin catcher on the pump. The design of the wash action on a front loader is ...
...lint trap in the Kenmore He2 Plus front load washer? An error code is coming up to check this. First you need to remove three screws on the front lower panel. This will expose a round "plug" to your ...
...use the dryer on where does the fluff go when you use the dryer? The lint should go in the lint trap. If it doesn't go in the lint trap it goes out the exhaust pipe if the lint trap is not
...lint trapped very deep. I removed the two screws on the front and still cannot remove the plastic frame that holds the lint filter. I have tried vacuuming, but cannot get down deep enough due to the ...
Question about Frigidaire Washing Machines
...lint trap of my Affinity washing machine Does my Affinity have a lint trap...where is it and how do I get to it no lint trap...the best you can do is give it a hot wash bleach with a cold ...
...lint trap 1. drainage indicator was lit 2. cleaned lint trap 3. after cleaning lint trap I have got water leak. 4. Also water drainage indicator was back on after an hour or so; lean trap was cleaned ...
...lint trap. Lint traps in washing machines can be in the agitator (the large plastic piece in the center of the tub), at the top of the washer on the rim of the tub, or attached to the washing ...
...front of you on the bottom. There is a lint trap. Undo 3 x 7mm screws on bottom front kick plate. Drop the kick plate and pull out. Right in the middle bellow the drum is a lint trap. Unscrew cap ...
...feel for 3 screws right under the front, bottom. Unscrew these and pull down - you will find the lint trap. Be prepared for water, and since the model is 2002 - immense junk too! Pl say so if
434 questions posted
Usually answered in minutes!
2,979 Questions
1,498 Questions
947 Questions
680 Questions
658 Questions