Maytag LSE7806A Top Load Stacked Washer/Dryer "doesnt water pressure switch turn" Questions

Ad

Question about Maytag Washing Machines

1 Answer

...even when the washer is turned off, you need a new water valve. If the water only comes in when called for then doesnt stop you need a new pressure switch and possibly a new pressure switch ...

Ad

Question about Washing Machines

2 Answers

water doesnt stop over fills the tub Most washers have a pressure switch in the control panel that controls the water level. A plastic or rubber tube connects from the bottom of the tub to the ...

Ad

Question about Washing Machines

1 Answer

...doesnt do it itself The water level in your, and most other, washing and dishwashing machines is controlled by an air pressure switch that senses water level by the rising air pressure compressed in ...

Question about Whirlpool Washing Machines

1 Answer

...but the water never shuts off turn power off then turn tap on if water comes in then the valve is faulty,if it doesnt then check the pressure tube for leaks or the pressure switch.hope this ...

Question about Maytag Washing Machines

1 Answer

...doesnt unlock while clothes are in. it beeps too. Hi there First thing i want to say is Merry X-mas. i have found what you need and hope this get's you in the right direction. F/H No water detected ...

Question about Fisher and Paykel Washing Machines

1 Answer

...module.if the water doesnt stop filling after the 30 sec stop it is the water valves. by the way what country do u live in because $120 seems to b alittle too expensive. please reply 4 more

Question about Maytag Washing Machines

1 Answer

...doesnt seem clogged -- could it have shorted out ---- FH= No water detected entering machine or Pressure switch trip not detected. If after 30 seconds the control does not detect water entering ...

Question about Kenmore Washing Machines

1 Answer

...water level sensor because the agitator doesnt do anything (no noise, movement, no motor sounds, etc) it just sits with water in the tub until the spin cycle and then rinse and spin again. Am I ...

...doesnt work tank is filling with way to much water we checked the little dial to make sure it was at 1 seems to be releasing to much water on first 3 steps and on step 4 its putting to much water in ...

Question about Washing Machines

2 Answers

doesnt stop pouring water when I start any cicle my washing machine starts pouring water as it's supposed to do but it never stops pouring until I turn it off it is suppose to turn off, bad fill valve

Not finding what you are looking for?
Maytag LSE7806A Top Load Stacked Washer/Dryer Logo

434 questions posted

Ask a Question

Usually answered in minutes!

Top Maytag Washing Machines Experts

jimorris77

Level 3 Expert

411 Answers

Sheldon Dedek

Level 3 Expert

909 Answers

Bill Long

Level 3 Expert

606 Answers

Are you a Maytag Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...