...water is left in the bleach dispenser. It is filled to the top. I alway's thought it was suppose to finish up empty, so I can add bleach to the next load. Any idea's as to what has started this ...
water flow diverted to the Bleach dispenser the solenoid valve may be stuck closed. If you did not hear the solenoid valve hum the solenoid field coil may be open. Final technical troubleshooting as a
Question about Maytag Neptune Washing Machines
water valve with Bulky Items Key Pad. Final technical troubleshooting as a technical owner of the machine would be to take my DVM and verify 120VAC from the Control Board to the Bleach/Fabric Softener
Question about Maytag Neptune Washing Machines
...water feed. The left and right jets fill the bleach/fabric containers. These left and right jets do not appear to be opening at all and I am guessing that the controller for the jet solenoids is not ...
...water flow diverted to the Softener dispenser the solenoid valve may be stuck closed. If you did not hear the solenoid valve hum the solenoid field coil may be open or loss of 120VAC from the Control ...
...LEFT IN THE HOLDER AND NOT DISPENSED. I CLEANED THE DISPENSER IN CASE IT WAS CLOGGED. IT DID NOT HELP. "downy ball" is designed to open at the end of first spin that is the way to go without stopping ...
...water valve is an assembly and is not repairable you have to replace. Final technical troubleshooting as a technical owner of the machine would be to take my DVM and verify 120VAC from the Control ...
Question about Maytag Neptune Washing Machines
water channel on the left side of the lid lines up with the left side (bleach) dispenser valve I'll post a pic but lately the picks won't be displayed. This forum is difficult for DIY support.
Question about Maytag Neptune Washing Machines
water flow diverted to the Softener dispenser the solenoid valve may be stuck closed. If you did not hear the solenoid valve hum the solenoid field coil may be open. Final technical troubleshooting as
left is control board at $335+. No error codes Same problem with a maytag mah8700aww. Mine has three cold water valves in a single assembly. none of them dedicated to fabric softener. #1 for cold fill
1,827 questions posted
Usually answered in minutes!
2,979 Questions
358 Questions
175 Questions
151 Questions