...motor wire harness connector on these washers. The problems are either a loose or bent terminal in the molex connector. Unplug the connector and tug on each wire. If a wire comes loose from the plug, ...
...loose. Can someone help me? Or should i call someone, to make things more complicated, my wife has a new $1k Samsung being delivered. I would love to save that $1k. HELP!! If belt is not broken, then ...
motor causing a loose connection. check for bent male terminal at the motor block. can be what's called a hall sensor but it isn't a seperate part from the motor. It senses the rotation of the tub and
...motor shaft. The blower is made of plastic and somtimes the blower comes loose on the shaft. Usually you hear a rattling sound or sounds after the dryer drum stops as the loose spinning blower spins ...
Question about Maytag Neptune Washing Machines
...motor wire harness connector on these washers. The problems are either a loose or bent terminal in the molex connector. Unplug the connector and tug on each wire. If a wire comes loose from the plug, ...
...motor wire harness connector on these washers. The problems are either a loose or bent terminal in the molex connector. Unplug the connector and tug on each wire. If a wire comes loose from the plug, ...
...motor. Unplug connector and pull on each wire. If a wire connector comes loose from the plug, bend locking tab up as illustrated. NOTE: If a locking tab is not properly seated in the plug connector, ...
Question about Maytag Neptune Washing Machines
...door stays locked and I just hit the start button and it goes again. Any ideas? the belt could be to loose and the motor overload is kicking out the motor and when the motor cools off it will
...loose connection at the main board, at the door switch or the motor is bad, bet motor kit # for motor and board 12002039 good luck with the repair Maytag Neptune MAH6500AWW When I start a cycle the ...
...pump and lines to pump again but still no spin recheck pump and hoses something may hung in hose then broke loose and clogged pump again..also ck pump impeller it may have come loose from motor ...
1,827 questions posted
Usually answered in minutes!
2,979 Questions
358 Questions
175 Questions
151 Questions
