Question about Maytag Neptune Washing Machines
...Displays the dc code and does not finish the spin cyclewater is still in bottom of tub See my Clutch Fix post will get you started. Post back if you want to DIY the fix and need any ...
Question about Maytag Neptune Washing Machines
...seldom report all the conditions of wild tub swings. You are on the ball with info feedback. See if this post Clutch Fix will get you started. Post back if you have questions or need ...
...Fix if the wash tub is banging around in spin cycle that link will help you save your $1K machine. You can't get the Service Manual from Servicematters.com anymore you can from other Appliance repair ...
...tub swings during Spin Cycle? If so the TDS sensor is saving your machine from shacking itself apart. If your machine is one of those two models I feel you have a Clutch malfunction with the limited ...
Question about Maytag Neptune Washing Machines
...with an FP code and there was water in the tub. It will not restart. What should I do? http://www.applianceaid.com/neptune8.html Sounds like a power failure, which needs a service tech out to
Question about Maytag Neptune Washing Machines
...tub is banging around during the spin cycle correct? You can redistribute the wash basket load until the cows come home the issue will only continue to get worse. Maybe start throwing uC error codes ...
Tub Displacement Sensor is working as designed. Fix the Clutch malfunction and you can wash a single sock or a load of blue jeans and you will not take the dc or UC unbalance errors. See this post for
...fix for the tumbler action of twisting up the clothes. After a re-lube of the one-way roller clutch bearing I could wash a single pair of socks or over load the wash basket with bath towels and extra ...
Question about Maytag Neptune Washing Machines
...finishes the cycle & doesn't expel the water. NO codes come up as an issue either. ?? I did a lot of off line work with him via e-mail. I'm going to ping him and see if his machine is still in ...
tub and the display will show ?UC? (Unbalance Closed). If you get these results your TDS sensor should be just fine and not the cause of dC or uC unbalance errors??fix the clutch and your machine will
1,827 questions posted
Usually answered in minutes!
2,979 Questions
358 Questions
175 Questions
151 Questions