Maytag Neptune FAV6800AW Top Load Washer "cold cycle" Questions

...cycle but the cold water is still running and the tub fills up. can turn off and select the spin only cycle and the water will stop and drain and spin. what is the problem electriic inlet valve is ...

cycle only, the cold water will not stop filling the washer until the computer board clocks out after twelve minutes. The no fill code 'nf' displays. The washer will fill appropriately during the wash

...cycle, the cold water still does not shut off. I have manually closed the cold water supply valve to temprarily stop water flow. Clean or replace the cold water valve. you are a flood

...cycle. Assuming you are doing cold water wash loads. You could have a water line block at the inlet screen or a failed cold water inlet valve which will not open. Try the above and let me know the ...

...minutes. cold water valve in back could be plugged causing longer fill times. Could be a plugged filter screen in either the hot or cold water supply hose. Longer filling time aads to the cycle

...ends When rinse cycle ends the cold water keeps running. Your water inlet valve is sticking which means that it needs to be replaced. You can get it at your local appliance store or at ...

...cold water during the rinse cycle. It fills with only hot water & the clothes are steaming hot when removed. I was told by my repairman it is normal for hot water to be in the cold cycles to get ...

...cycle with Hot water only or Cold water only? I would do a Quick Wash cycle just to test with an empty wash basket. Regardless of the above test and assuming you have good water pressure for both Hot ...

...cycle only warm /hot water will dispense....no cold water. Everything on the washer has been checked and I don't know what is left to check. I have replaced the water valve, the cold and hot ...