Maytag Neptune FAV6800AW Top Load Washer "clogged fabric softener" Questions

fabric softener dispenser. If you remove the dispenser drawer and look into the cavity, there should be a series of holes in the upper part of the compartment where water sprays into all the dispenser

...fabric softener in it seems to be clogged somehow. I cleaned it out and it seems to still be clogged is there any suggestions that you can give me?? Please help...thanks!! Are you sure you have water ...

...fabric softener cup seems to be clogged, what do I do? If your machine is a FAV6800AW/FAV9800AW see if this post will help you. Once the Fabric Softener top is removed you can flush the dispenser and ...

fabric softener dispenser may be clogged or the water dispenser valves feeding both dispensers may not be operating properly. The Service Manual on page 16 ?Board Output Test? will give you support to

...Fabric Softener dispenser is clogged you can flush with White Vinegar solution and clean exit port with a pipe cleaner. I do not suspect a clog with the Bleach dispenser. You could go into Service ...

fabric softener. All valves work, solenoids draw about 0.035 amps when on, no clogged hoses. The Service Mode lets me toggle everything on on off and all works fine, but..... no water ever goes to the

...fabric softener goes into the dispenser. it may be a full blown solenoid valve -or- a flapper type of solenoid valve. operation of the solenoid operates a flapper to let the softener out. go to an ...

Fabric softener doesn't go down the tray into the wash when washing. Your softener shute is probably clogged up, pour hot water into it slowly untill it clears.

fabric softener stays in the dispenser won't pull the softener Sounds like it's clogged up try pulling it out and rinsing through the syphone hole with hot water.

The small compartments that hold bleach and fabric softeners do not empty after the wash. ?I cannot figure out where a clog might be. Was this a scam to try to get me to buy repair advice?