Question about Maytag Neptune Washing Machines
...light not on was her just pause holding, one time lights were cycling in pattern and beeping. Now is lights on normal wash 68 minutes and doing nothing Here is the Service Manual for the ...
...Control lock light is on. Cannot use the control knob. Have unplugged machine, but "control lock" light stays on First things first... please follow this link to see if your machine is part of ...
...control board however, it remains blacked out. no led light, nothing. Light comes on at the door when opened. wondering if that may be my only problem, wife stated that she smelled an burning odor ...
...control locked light will not turn off, I recommend unplugging the washer for 5 minutes. Plug the unit back in and see if the controls will respond. If not, You could have a failed control console or ...
Question about Maytag Neptune Washing Machines
light on the same circuit would go alternately normal then bright then back again. At one point the control panels on each machine flashed PF before they went dead. The wiring has since been repaired,
Question about Maytag Neptune Washing Machines
light comes on. If it does not, you need to replace the wax motor in the door lock assembly and the machine control board, which is inside the control panel. The control board is expensive, so instead
Question about Maytag Neptune Washing Machines
...light was on too. This could be a Control Board issue or a Console Ribbon cable connection to the Control Board socket. Re-powering the machine will probably not clear the issue. If a repair company ...
go to hot light will not move up. do i simply need a new touch pad? The machine control pad, with the LED lights, is going out. Replace this control pad and all lights should be working normally again
Question about Maytag Neptune Washing Machines
...control, main circuit board and wax motor. Do you have any suggestions. The only other thing that could cause the ON light to turn off as soon as the motor is about to start would be a bad or loose ...
Question about Maytag Neptune Washing Machines
the lights come on in both upper/lower units but control panel lights are completely out and the dryer does not work. How do I troubleshoot this - do I need a new control panel? Check your connections
95 questions posted
Usually answered in minutes!
2,979 Questions
1,498 Questions
358 Questions
175 Questions
151 Questions