Question about Maytag Neptune Washing Machines
...walks across floor during spin cycle washing machine walks across floor during spin cycle. I have leveled the machine and it still persist in walking. Did you set the back feet before leveling? On ...
Question about Maytag Neptune Washing Machines
spin cycle. Maytag Neptune Series MAH5500BW Washing machine is very loud and shakes during the spin cycle. It does not walk, is level and on a ceramic tile floor. No visible leaks. Apparatus on top of
Question about Maytag Neptune Washing Machines
...walks across the floor during the spin cycle. I have had warranty service come out four times in the past two years to try and fix it and it still does it. I can not leave this machine alone, because ...
Question about Maytag Neptune Washing Machines
...machines are supposed to balance the load for spin? Mine walks all over the room. level the machine, if you are on a wood floor it could be the floors fault, you could try using aanti vibration
...spin cycle(shut machine off) as it was walking across the floor. Now it seems to be stuck on the place where I stopped it. I unplugged it overnight and it didn't make any difference. Machine shows no ...
spin cycle and will make very loud noises along with a rocking vibration while spinning. Also, I have noticed small holes in our clothes. I do not know if it that hard on them or if there is something
Question about Maytag Neptune Washing Machines
Walks out of its space during med to high spin cycle This is probably either the motor mount at the bottom of the machine has come loose or the "shocks" are disconnected or worn out. The front of the ...
Question about Maytag Neptune Washing Machines
...walks during the spin cycle. It is absolutely level, sits on a very solid floor and will do this no matter what size load is washing. We have tried the non-skid pads and it walks right off them. How ...
...SPIN CYCLE. IT DOES NOT WALK Central bearing and seal are damaged. Very expensive repair and very expensive parts. Maytag does not sell bearings separately, they're only available with the outer tub, ...
...walks the floor" during the spin cycle. How do I correct this? Try to get it completely level and with all four feet firmly on the floor. If it's resting on three feet and/or not level then this is ...
3,973 questions posted
Usually answered in minutes!
1,498 Questions
358 Questions
175 Questions
151 Questions