...smoking i have a MAH3000 washing machine. a few months ago, it had smoke inside drum area when the cycles finished (per wife, i could never verify). it soon started sounding like a jet engine. last ...
My Magtag Neptune TL 6800 started making a horrible squealing noise then smoke started coming out of the washer. What do you the problem may be? You need to replace the belt needed to spin the drum. ...
Squealing noise during wash cycle souds like a belt slipping and has smell of hot rubber and wisps of smoke come from around the tub.Model is MAH5500B front loader and is not that old yes thats a belt
machine. Hello, If you remove the rear panel you can check the condition of the belt. The belt may be breaking apart and wrapping around the motor or pulley. I would start there. If you find a damaged
Question about Maytag Neptune Washing Machines
my top loading washer the water come in but it want move and" there is a smoke smell It sounds like you have a bad belt, possibly because the drum is stuck. Make sure the drum turns freely and then ...
...heavy, delicate or perm press, it seems the drum spin at the same speed. Didnot always do this. Also, noticed a smoke smell when machine was maybe over loaded. Belt issue?? id say u have a bad ...
Question about Maytag Neptune Washing Machines
Spin cycle gets real loud and then smells of smoke. Like rubber. Replaced the seal. Took the back off and there was no water leaking and everything seemed fine. Help??? Could be drive belt or motor ...
Question about Maytag Neptune Washing Machines
My wife noticed smoke right after starting the washer. She immediately turned it off and called me. I noticed a smoke smell which smelled more electrical than rubber. The basket spins easily. The ...
Question about Maytag Neptune Washing Machines
...smoking (mostly seems from the inside) and smells like the belt is burning, but the belt isn't hot. HELP!! :) The bearings have been replaced but now it is smoking (mostly seems from the inside) ...
...is does the belt need to be replaced. Or is there drag on the drum to cause the the belt to slip. Other than that the machine works perfectly. BELT IS LOOSING TENSION CAUSING IT TO SMOKE REPLACE ...
3,973 questions posted
Usually answered in minutes!
1,498 Questions
358 Questions
175 Questions
151 Questions