Question about Maytag Neptune Washing Machines
...the 2 plastic isolators with the new ones supplied with the belt on the motor spindles. After re-installing the motor & bolt adjust the new belt. Please post back for any further assistance. ...
...fixed with an old belt or is something out of alignment Chances are the old belt came off in the first place because it stretched over time. Get a new belt, install it and you should be in good
belt on the back of tub keeps coming off every time i put it on......why?? either the belt is not on the right set of grooves on the motor pulley or the belt is stretched and needs a new belt
...belt new belt fell off. Pls help. Can you confirm your model number? FAV6800A or FAV9800A? If it's one of those models with 120VAC power cord removed from the service outlet and the front cover ...
Question about Maytag Neptune Washing Machines
...new belt got it in middle of pulley and wants to ride on outer tub on pulley when tight Please check if the pulley is going off track or if the belt is not of the same type used. check this link: ...
Question about Maytag Neptune Washing Machines
new!) belt can be persuaded on- it is likely to be quite tight anyway. Once on tension the belt by pulling firmly on the motor and tighten the bolts. Do not lever the motor to tension the belt as that
...new belt for my washer, but cant get it back on seems too small but it is the right belt. I have foun even with the Drive Belt/Motor tension bolt tension released it is difficult to walk the drive ...
...is still about a half an inch off I suggest you check your drum bearings, belt will only come off if misaligned. replace motor hanger bushings they wear out old ones are rubber the new ones are ...
correct belt, then you will really have pull and stretch it hard to get it on. It is the case that the new belt wiill not appear to be the right size. Just persist, mind you do not trap your fingers!!
...likely that a new belt will fix the problem? 1st- check to see if pulley is worn and wobbly this can cause the problem idler pulley may be jumping check all pulleys and make sure there not wearing ...
3,973 questions posted
Usually answered in minutes!
1,498 Questions
358 Questions
175 Questions
151 Questions
