...If the noise is a squealing or grinding sound, you are likely looking at a bad seal and bearing. If the noise is a knocking sound, it's more likely a suspension or out of balance condition. ...
...knocking noise slow to spin out and most of the time wont spin out at all Hi, Check out this tip I wrote about that... http://www.fixya.com/support/r3663122-washer_problems_washer_noise_when ...
Question about Maytag Neptune Washing Machines
...model. Hi, Here is a tip that I wrote about dryers and noises... It will help you determine what is happening there... Dryer Repair Squeaks, Grinding, Clicking and Knocking Noise heatman101 ...
...knocking sound Hi, When my washer did that, I found that the shocks that hold the tub were bad... Check out this tip I wrote about the noise and vibration that front loadwashers can make.. Washer ...
...there... Dryer Repair Squeaks, Grinding, Clicking and Knocking Noise heatman101 Asker's Testimonial "That answer was very informative - thank you for taking the time to educate me. " - ...
Question about Maytag Neptune Washing Machines
...knocking noise on the final rinse/spin cycle Hi, It is a phenomenon called resonance. Whenever the natural frequency of your sink unit is equal to the disturbing frequency (rpm of the spin cycle of ...
Question about Maytag Neptune Washing Machines
Knocking" Noise In Spin: The noise could be from a loose wire harness, plastic purse-lock wire harness retainer on upper hose hitting the topcover or a plastic injection mold standoff on the outer tub
Question about Maytag Neptune Washing Machines
...final 5 minutes (really loud). hi,this sounds very much like the bearring have worn out,to check this open door and lift silver drum up and down if you feel a knocking noise then its your bearings
Question about Maytag Neptune Washing Machines
...knocking around in the back of the washer. On the spin cycle, the noise is very loud anyway, but it sounds like there is something banging around inside. The drum moves around also. ok open the door ...
knocking noise which is often worse when the washing machine is revving up to spin and dying down from a spin (suspension problems are also often worse at this stage too). It's not normally a metallic
3,973 questions posted
Usually answered in minutes!
1,498 Questions
358 Questions
175 Questions
151 Questions
