...growling noises during the drain cycle, failed to drain, and flashed 'nd'. I was able to manually drain the washer by placing the end of the drain hose in a bowl on the floor and baling until it was ...
...growling humm from the pump. Clued in by the above postings I pulled the washer away from the wall, tipped it back so it leaned against the wall with the bottom fully exposed and removed the ...
Question about Frigidaire Washing Machines
...growling noise instead, leaves a about an inch of water in the bottom. use a shop vac and attach it to the end of the drain hose remove all the water then you need to check the drain pump and see if ...
growling sound kind of like a berring and sometimes stops running before end of cycle will not re start until it cools down could this be the motor???? That growl could mean trouble. You need to check
...growling noise that sounded like it might have been a slipping belt but it turned out to be a motor drive problem. I fixed mine with a motor/control board kit (ebay) for $155.00. However, there was a ...
Question about Maytag Washing Machines
...sure what to think. If it's a universal motor the brushes are probably worn out when they are at end of life the motor will growl for a short while during which time it is arcing and spoiling the ...
...growling noise was probably the bearing going at the bottom of the trans and is now seized you may also find a water leak at the tub seal this is the most common reason for these failures you will ...
growling) They were well worn. I ahve fitted the new ones,washed well but was slow spinning and then began to smell. I have removed the motor and stripped, can't see a cause but some windings have got
end, was on the floor when i moved the washer. Any info on what may have happend and how to remedy the situation would be greatly appreciated. Thanks Hi, The suspension plate should be loose and float
and see if the machine moves or rocks AT ALL, even the slightest. If it does you will need the open-ended spanner which came with the (new) machine........which of course went missing a long time ago?
3,973 questions posted
Usually answered in minutes!
1,498 Questions
358 Questions
175 Questions
151 Questions