...drum is not moving and the water is not coming in or spining out The LR error on your non-spinning Maytag Neptune is usually, though not always, accompanied either by a burn spot or a blown fuse on ...
Question about Maytag Neptune Washing Machines
...drum off and on about every 30 seconds for a second at a time even after pressing the off button.showed error codes sd and lr.have gotten it to spin out in the past but started clunking like load was ...
Question about Washing Machines
...drum. Put back together and have a connector left out with a peach and white wire. Does any body know where this goes? Google make model wiring diagram Many machines have the wiring diagram hidden ...
...wiring could also cause the issue. Finally, the bearing on which the drum spins is bad. The MCU is the most likely faulty part unless you find a wiring problem. (The wiring harness has a number of ...
...wiring diagram for a WMA34 hotpoint washing machine. I have changed the drum bearings and have assembled the machine to a point where I have the wires to join the power input terminals to the circuit ...
Question about Maytag Washing Machines
...wiring and voltages from control modules must be tested.Try first doing a reset, by disconnecting power cord or tripping circuit breaker and leaving power off for five minutes.If that does not help ...
Question about LG Washing Machines
...drum near the detergent drawer. I am thinking one of the valves is opening and i suspect the pre-wash valve. I am assuming that valve is normally closed and has no business opening during the dry ...
Question about Whirlpool Washing Machines
...diagram and part to replace. Try checking the pressure switch it controls level of water by way of pressure switches off valves around the 3-5 psi mark..Think you may find that the hose feeding this ...
...drum. Splice the broken wires to the matching end or replace the wire in the unit. Then check if that has solved the problem. If you do not see a broken wire, check the continuity with a multi-meter ...
...drum was knocked out of position and two leads were knocked off it. The wires that connect to it are one blue wire and a blue/white wire with another green wire also coming from that connection. can ...
3,973 questions posted
Usually answered in minutes!
1,498 Questions
358 Questions
175 Questions
151 Questions