Clothes are soaking wet after done Machine runs yet clothes are soaking wet after the spin cycle. It isn't usable. You may need a belt or a pump. Call sears they will help more.
clothes are soaking wet after the cycle. I tried just putting it on spin again and there still soaking wet check the pump it sounds like the pump is stopped up this sound like the water inlet value is
...clothes are coming out soaking wet. i tried putting it on spin again and they were still soaking wet. we took the pump out and it is working. it is a maytag neptune stackabe, model mlg2000aww. just ...
Question about Maytag Neptune Washing Machines
...do final spin cycle leaving clothes soaking wet. Your drain pump has something lodged in it. Remove drain motor, open it up and inspect for obstruction. remove it then reassemble.retrywashing
Question about Maytag Neptune Washing Machines
...wet clothes. We got the clothes out three days later and the clothes smell horrible. We pre-soaked them in a wash tub, then pre-washed and washed on heavy cycle. They still smell like the stagnant ...
Question about Maytag Neptune Washing Machines
That is the problem. clothes are in bottom of washer and soaking wet washer does not spin Is there a motor noise? Could be belt issue if there is a motor noise and no spin.
...clothes were still soaking wet......Any help would be greatly appreciated.... one way to "assure this is the issue" is to remv ethe 3 screws holding the back panel on. tip the back control panel down ...
clothes soaking wet when done washing? Hi, You could have had a over balanced load or the unit doesn't see the lid closed. I would check the load of close or the lid circuit before changing parts.
Question about Maytag Neptune Washing Machines
...clothes is still soaking wet my washer is having problems spinning when the cycle is done my clothes is still soaking wet and there is still water in the machine! at first i thought i put it on a ...
...are quite wet if the clothes are soaking wet, the tub isn't spinning. Have you stood at the machine and listened for the spin? solution may be as simple as a broken interlock switch. Let me
3,973 questions posted
Usually answered in minutes!
1,498 Questions
358 Questions
175 Questions
151 Questions