...bra wires. If clean, remove drum to pump hose from the pump and check for any foreign matter. Try to turn the pump impeller by hand. It should turn freely. If pump is not free, replace it. My neptune ...
...bra is missing a wire and dryer is making a scraping sound like something is caught. how do I look at the drum? it is a ge front load dryer. thanks ok the dryer has to be unpluged the front remove ...
...bra wire I made a terrible mistake. Somehow I forgot and put a bra with wires in my washer, which is LG All-In-One Washer/Dryer. Unfortunately, one of the wires came out and stuck somewhere behind a ...
...bra wire regards a coin you would have to take off the main pump hose connected to the drum our else take the heater element out and see if you can find it if it is a bra wire just rotate the drum ...
bra wire has gone inside the drum,how do you remove it you can take off the rubber around the drum and then using a torch find the wire an get it out or if you have a magnet use that.
bra wire stuck in the drum washed an underwire bra and one of the wires came out and is now stuck between drum and casing. Is there any way to get this out without calling out the engineer? Are you ...
...bra wire from previous wash but no evidence of this sticking through the holes on the inside of the drum. What do I do next? Thanks (It is a Hotpoint Aquarius WD420) If you cannot here it catching, ...
...bra wire bears no relation to your present problem. Remove top cover, screws at rear, and push top cover back. See if the belt is still on, if it is, then select final spin and see if the motor and ...
BRA WIRE STUCK BETWEEN DRUM AND HOUSING Found two posts of people with bra wire stuck between drum and housing but answer. Not much hope asking but is there a solution? how would i access that area? I
wire from bra stuck in drum .can i get it out without an engineer. no. this type of machine has to stripped down.
3,973 questions posted
Usually answered in minutes!
1,498 Questions
358 Questions
175 Questions
151 Questions