...Door switch/lock unit failure. 1. Unplug washer or disconnect power. 2. Check door switch/lock unit. 3. Check the wire harness connections to the door switch/lock unit and Main control board. If the ...
Question about Maytag Neptune Washing Machines
...load door? your door switch is defective on this side of the switch,one side turns on the light when the door is open,the other switch section controls the machine circuitry when the door is ...
Question about Maytag Neptune Washing Machines
...switch in door lock mechanism is not able to communicate to the control board is open.Try taking the following action 1.Make door is closed. 2.Check for loose wire connections at switch and/ or ...
...locked but the control does not sense the door has locked. It could be caused by: faulty door lock solenoid loose wire connection faulty door lock switch faulty door lock sense switch bad control ...
Question about Maytag Neptune Washing Machines
...attention. or washer door. hope this helps ! 1.Make sure door is closed. Check for loose wire connections at switch and/ or machine control board. .Check for failed door monitor switch. good-day
...switch in door lock mechanism unable to communicate to control board the door is locked. Solution Check the wire connections in harness leading from machine control board to door lock mechanism Check ...
...switch in door lock mechanism is not able to communicate to the control board is open. 1.Make door is closed.2.Check for loose wire connections at switch and/ or machine control board. 3.Check for ...
Question about Maytag Neptune Washing Machines
...door switch control the front load washer and dryer performance The door switch is a saftey switch that will prevent the machine from operating and the drum from turning if the switch is not 'closed' ...
...door switch or the wiring that goes to the door switch first try to open and close the door and make sure it seats properly in the small hasp type holder if the error code still persists then check ...
Door switch/lock unit failure. To resolve the issue follow these steps--- 1. Unplug washer or disconnect power. 2. Check door switch/lock unit. 3. Check the wire harness connections to the door switch
132 questions posted
Usually answered in minutes!
2,979 Questions
1,498 Questions
358 Questions
175 Questions
151 Questions