Maytag Neptune MLG2000A Front Load Stacked Washer/Dryer "door lock" Questions

Door Lock Error occurs if the door cannot be locked. It will try to lock it six times before displaying the error code. Possible Causes / Procedure ? Door lock mechanism is broken or removed from door

...lock the door after you closed it. Open and close the door tightly, then restart the washing cycle. Door lock monitor switch in door lock mechanism unable to communicate to control board the door is ...

...Lock. Door lock monitor switch in door lock mechanism unable to communicate to control board the door is locked. Solution Check the wire connections in harness leading from machine control board to ...

...lock. Door lock monitor switch in door lock mechanism unable to communicate to control board the door is locked. 1.Check wire connections in harness leading from machine control board to door lock ...

...Door Lock Error occurs if the door cannot be locked. It will try to lock it six times before displaying the error code. It has happened because Door lock mechanism is broken or removed from door. It ...

...locked but the control does not sense the door has locked. It could be caused by: faulty door lock solenoid loose wire connection faulty door lock switch faulty door lock sense switch bad control ...

...door lock solenoid loose wire connection faulty door lock switch faulty door lock sense switch bad control board I recommend calling a service technician to diagnose and repair your washer. but try ...

...door lock mechanism is not able to communicate to the control board is open. 1.Make door is closed.2.Check for loose wire connections at switch and/ or machine control board. 3.Check for failed door ...

door lock is energized and closed, the wash cycle would complete without a hitch. Any help will be greatly appreciated -- short of changing the main machine control board. I checked all possible loose

Door lock mechanism Door does not close tight enough to engage the automatic lock mechanism - the machine makes several attempts to lock and then the FL clode (failure to lock) code is displayed. I ...