Maytag Neptune MLG2000A Front Load Stacked Washer/Dryer "clean hose filter screens" Questions

...hose connection...remove them, clean them and carefully reinstall them. The screens in the washer valve will be just inside the valve where the hose connected. Carefully remove, clean and reinstall ...

...screw driver and you can wiggle it in on the very edge of the screen and pop them out.... The other way is to reverse the hose and blow water backwards through them to clean the crud out... ...

...Clean Filter: Flashes when a cycle is selected as a reminder to clean the filter before starting a cycle for optimum drying results. Code clears when the door is closed and the START pad is

...for very short period then slow. Hose filters changed, no affect. any suggestions? Dale Have you cleaned the wire mesh screen in the hose. Does the hot and cold water do the same. Disconnect the ...

...really slowly and then the NF display comes on. There is no water pressure problem elsewhere in the house. Remove the water hoses from the washer and clean out the filter screens in the water

... Disconnect hoses and clean screens. Hose filter screens may be plugged. ? Open and close the door, then push the start/pause pad. May be a bad door sensor!!!!!!! Huuum Pleae remember to leave a ...

hose for grit and such. Then you will need to check the washer where the hoses connect to the water inlet valves there are also screen filters here. It is best if you can take a flashlight and inspect

...filter located and need instructions to take apart to clean it out it is located behind the waher where both hoses meet you have to take them off at the back of the machine and it should be right at ...

hose connectors on the machine and I am not sure if they come off so I can clean the fliters? Hi from retired Englishman in SW France, Turn the taps off and unscrew the hoses, noting which goes where.

...I get to where you clean the hose filter screens If you shut off the water supply and remove the hoses from the back of the machine they are right inside the fittings from where you removed the