Maytag Neptune MAH6500A Front Load Washer "sink" Questions

...had been unused for at least 3 weeks. First of all, is your drain hose connected to a kitchen sink or into a standpipe? If its a sink make sure you form a loop or curve in the hose as high as ...

...rinse/spin cycle Hi, It is a phenomenon called resonance. Whenever the natural frequency of your sink unit is equal to the disturbing frequency (rpm of the spin cycle of the washing machine) the ...

...at that spot where the hoses were taken off. it looks just like the screen for a faucet in your

to excess detergent blocking the feed into the machine, try removing the tray and washing it in the sink. If this works I would rinse it out every month or so, this could be done in the machine by not

...the door seal. Any ideas - are these problems related? if outlet pipe is connected to u bend under sink it is possible back flow. for smell use soda crystals and put machine onto wash cycle, this

...washer but here are 3 things to do- 1) check to see if your washer's waste water pipe shares a sink's plumbing- quite common. If so suspect bad smells from the sink's u-tube rather than direct ...

drain pump or in the drain hose, or even in the connection where the drain hose connects under your sink to the drain or to the garbage dispossal if you have one. check there first. If that is not the

... Your hose should not fit airtight into the standpipe and neither too deep into it. Some connect to sink, fine. Snaking out your standpipe would be good too. Your filter is where the big tube ends ...

...was wondering if there is a filter that needs to be cleaned periodically. If you mean your laundry sink, then mix 1 cup baking soda and 1 cup vinegar together and pour it into the drain. Let it sit ...

...the machine from the wall and remove the drain hose where it connects to the plumbing under the sink/tub. Check the spigot for any blockage. Next remove the drum to pump hose from the drain pump ...