Question about Canon Office Equipment & Supplies
...machine. There are some errors. Error Error is E194-101 clean or replace your pattern reader also turn image off in service mode this is only a temp solution and you can get miss regristation later ...
Question about VeriFone Office Equipment & Supplies
...daily It would depend on the program in the terminal, you should call your merchant service provider and have them turn on the autosettle flag. Then, you will do a partial download into the
Question about Canon Office Equipment & Supplies
...turn on the printer. 3. If the printer displays this status code again, call for service. sorry if this doesnt work you have to take it in for service... The only thing I could find to help is ...
...Turn DIP switch 101-1 ON and OFF. Turn the main switch OFF and ON. Code E 52 Fusing lamp warm up error.Causes:thermistor open,fusing lamp open,therofuse open,power supply/ac drive board defective. ...
...and on the main switch. The following procedure must be performed to clear these service call conditions: 1. Turn on the main switch. 2. Turn DPS 101-1 on and off. 3. Turn the main switch off and
...and on the main switch. The following procedure must be performed to clear these service call conditions: 1. Turn on the main switch. 2. Turn DPS 101-1 on and off. 3. Turn the main switch off and
Question about Office Equipment & Supplies
...turn DIP switch 101-1 ON and OFF(the DIP switch is located in rear part under main supply board).,and turn the main switch OFF and ON. I have a RICOH FT 4022 copier and it displays E 1 01 error code. ...
Question about Ricoh Office Equipment & Supplies
...Turn the main switch off. 2. Remove the BACK rear cover AND EXPOSE THE MAIN BOARD. LOCATE DIPSWITCH 101 ALSO CALLED DPS101 AND PUSH UP THE NUMBER 2 SLIDE OF THE 4 SLIDES and turning on DPS101-2, then ...
...101 appears. this is an error for the scanner lens or exsposure lampl you cna check this when you turn the machine on the lamp should move to the right and you should see the lamp light up if not ...
Question about Ricoh Office Equipment & Supplies
...turn DIP switch 101-1 ON and OFF and turn OFF the main switch.Wait 3 sec and turn ON the main switch.The DIP switch is located in rear part under main cotrol board. the lamp didn't turned on and ther ...
17 questions posted
Usually answered in minutes!
2,244 Questions
2,149 Questions
1,862 Questions
1,594 Questions
1,302 Questions
