Question about Canon Office Equipment & Supplies
...copier is producing accordian paper. What is causing this and how do I fix it? Normally accordian copies are caused by a fuser unit problem, A sheet of paper may be wrapped around one of the ...
Question about Canon Office Equipment & Supplies
paper jam in back, accordian fashion, cannot extract lexmark e328 paper started jamming, folding into tiny accordian folds, partial remains in back, how do I extract this is really a Lexmark E328 but ...
Question about Canon Office Equipment & Supplies
paper in the back accordian My Brother printer MFC 7820 N folds the paper in the back accordian style. What can I do? check the drum unit and toner unit, also check on all rolls inside the printer. if
...the printer per the user manual. Opened back, side, removed cartridge, paper tray to look for any obstructions. Nothing. The exiting paper is accordian creased at the bottom. Replace Exit ...
Question about Canon Office Equipment & Supplies
...jam and when turned on a grinding noise occurs Most likely, there is a paper jam in the fuser unit....which is stalling the fuser rollers, thus causing grinding noise (accordian or fan folded
MAke sure the paper tray end fence is set against the paper. 2. If paper jammed in fuser (accordian shapped) remove the stripper finger that is sticking out by holding and rotating it untill it snaps
Paper jams and folds into accordians Most problems with the HP4 series can be fixed by replacing the paper pick roller. Is your paper jamming at the output slot on the top? Can you print ok with the ...
Question about Canon Office Equipment & Supplies
...accordian at exit tray paper jam internal, can't access more the likely it is in the fuser unit of the copier . I have this exact same problem. Do you need a new fuser, or is taking it out and trying ...
...when trying to make a copy the paper is folding up like an accordian before it meets up with the fuser more than likely your fuser is not turning the gear may be bad on the fuser or an internal
paper is coming out of the printer crinkled - almost accordian fold. It sounds like a fuser problem. You may have something stuck in it, or the lower roller could be defective. You may have to replace
86 questions posted
Usually answered in minutes!
2,244 Questions
2,149 Questions
1,862 Questions
1,594 Questions
1,302 Questions