Canon PowerShot S3 IS Digital Camera "disp button" Questions

the display screen doesn`t turn on Please press disp button to see the display contents. Sometimes pressing disp button and forgetting to press again cause this. Simply press disp button.

...shut off the lcd. Cycle the button to check. Mine was the adgum "DISP" button on back. Thanks smartr10U, you saved me $$$. I felt so stupid after pressing the DISP button and it worked. Thanks

...on the back of your camera. This manually turns the screen on and off (you can then use the optical viewfinder to save battery power). To turn it back on, just press the DISP button one more

...i do It could possibly be because after selecting the "disp." (display) button several times the screen goes black. Simply press the "disp" button until you monitor will show what your camera

...the view finder and press the disp button to cycle through menus until it comes back to picture view. Open the LCD. If it doesn't show picture view, Press the disp button next to the menu

...camera. This manually turns the LCD display on and off to save batteries. You would then use the optical viewfinder in its place. To turn the screen back on, just press the DISP button one more

Disp.) button? If it's an issue still after pressing that button, your LCD could be cracked or bad. In that case, you could have it replaced!! It's very inexpensive to get that repair done. Check that

...DISP button. canon has one disp button in lower right hand corner. when you are in play back mode, press the disp button three times. at any one point you must be able to see the photos. else revert ...

DISP.) button to turn the display on. This button is located on the rear of the camera and toggles the camera's LCD display. The button is usually printed with <DISP.> on the button or above the

...object's photo and can display on the screen. Thank you Sounds as if the DISP button was depressed here here is the sequence the DISP button function under. Diagram This should put you back in the ...