Canon PowerShot SD600 Digital Camera "hand signal screen" Questions

...signal in lower left hand corner of screen after about 5 beeps "Lens error, restart camera. And the cycle begins again. I have tried tapping the shutter with my fingers, leaving batteries out for 5 ...

...signal with a hand and a line through it. This causes a delay, which then causes many blurry pictures. Please help! Thanks, Jason A few possible causes: 1) You have a slow memory card. Borrow from ...

...signal in lower left hand corner of screen after about 5 beeps "lens error, restart camera. And the cycle begins again. Is there anything I can do to fix this? Lens errors are fairly common. Usually ...

screen is no longer clear. The picture is bleached out and very grainy. When I take a picture, the image looks the same way. It worked fine the last time I used it. Has your camera been left in a damp

...signal is not output from the CCD correctly when in shooting mode. This results in image abnormalities such as: Images do not appear Image colors are abnormal Images appear distorted These symptoms ...

...hand signal (similar to a stop hand signal) comes on screen, with lines around the sides of it. This is the camera shake warning, and thus the blur. It is suggesting you are using too slow of a ...

hand signal was there. When I came indoors the problem was not quite as bad, but still evident and the hand sign was still there. When I take an indoor picture with the flash, the hand sign goes away,

...hand signal is on. Make sure that you have not left the camera in Macro mode. This is a special extreme close-up mode offered by some cameras, and it does not allow autofocus on objects at normal ...

screen shows a light grey to white. ( not up date with cameras )Any idea`s , Raymond Hi Sounds like your CCD is defective, this is the part of the camera that actually captures the image from the lens

...hand this camera uses a proprietary battery. It may help to check the menus. Go to the menu and set all to factory settings as much as you can. You may find set all to default or some such wording. ...