Question about Maytag Dryers
...performa pye2300ayw dryer will start but will not heat up. No matter how long I leave it on, it just won't heat up. what could be the source of the problem? the model number - pye2300ayw rev - 10 ...
...START MAYTAG PERFORMA MODEL #PYE2300AYW Check the thermal fuse, located on the right side of the heater housing. If bad order LA1053 kit. Fair warning it's a real patience tester to install ...
Question about Maytag Dryers
My gas dryer has stopped working. Model # pye2300ayw I have checked breaker, plug, and door. They do not seem to be the problem. Any suggestions Maytag Performa PYE/2300,3300 Does it spin?
...Performa Dryer model #PYE2300AYW and it just quit running. I have changed both the Thermal fuse and high-limit thermostat kit. What I get now is a couple of seconds of running and then nothing. Not ...
...performa dryer model pye2300ayw, what should the ohms reading be on the thermal fuse? doesn't matter,it's either good or bad,when you touch the meter to it if it reads 1 and doen't move it's bad if ...
...Performa electric dryer will not start. The Model # is PYE2300AYW, Serial # 10923714ZB. It was working fine but will not turn on now. I have checked the breaker box and it is in the on position. Any ...
Question about Maytag Dryers
...performa model # PYE2300AYW Sounds like you have something shorted out. The element issue could be a contact fused shut. With both problems I would be looking for wires melted together, or a ...
...Performa, Model #PYE2300AYW and serial # 107-861-51YY..It wont do anything when I press the button to start the dryer it doesnt click anymore. I think it could be some type of switch or electrical. ...
...Performa model #PYE2300AYW dryer. The issue I'm having is the dryer stopping all together midway through the drying cycle. You can get it to start back up by pushing down on the selector knob. Please ...
...Performa Dryer model PYE2300AYW will not heat. It will turn on, but no heat is coming out. We cleaned out the vent and took the front off and cleaned out the lint from the front panel. How do we get ...
968 questions posted
Usually answered in minutes!
1,743 Questions
867 Questions
489 Questions
196 Questions
146 Questions
