...in ink tank section. Clean this sensors. Incorrect or dust colors - problems with printhead, or with the ink system. If you never replace printhead on this printer - call service. Thats be
...ink levels are incorrect Ever since I started using Walgreens to refill the inks instead of buying from HP, the ink levels will not show up correctly. Color shows a question mark at the top and Black ...
incorrect ink level. But keep in mind that printers often indicate 'empty' (on purpose) while there is still bit of ink left in the cartridge, to prevent running out of ink during printing. If shaking
...incorrect install? The remaining levels of the following ink cannot be correctly detected. Color The following ink is running low. Black [830] Prepare a new ink cartridge. The resulting print quality ...
Question about Dell Office Equipment & Supplies
...Ink is Low or Cartridge is Incorrect I have recently purchased a Dell system, which was barely used by a friend of mine. The printer and printer support center constantly indicate low ink levels. I ...
Question about Dell Office Equipment & Supplies
...incorrect" even though the cartridge has ink. Try pulling out cartrige.Starting printer without it.Then turn it off and put back cartrige.Start it again. Also, many other printers have problem in ...
green faces no red ink levels on the printer? if not the ink then a problem with the printer. is it a normal driver or are you using it on linux system? if linux then the driver my be incorrect.
...incorrect ink levels lexmark z615 with windows vista.. install new ink cartridges but ink status still indicates old cartridge levels after carrying out new cartridge instructions. i want = Driver ...
...ink levels, but that didn't matter anyway, as it was incorrect before!First of all, TURN OFF THE POWER TO YOUR PRINTER. Then lift up the scanner and remove the three screws along the top of the ...
...incorrect. where is the print head and how can it be fixed.. thanks That is a strange message unless you have changed the print head recently (or it has become defective). The first thing I would do ...
171 questions posted
Usually answered in minutes!
2,244 Questions
2,149 Questions
1,862 Questions
1,594 Questions
1,302 Questions