Canon PIXMA MP150 All-In-One InkJet Printer "pulley" Questions

...loose and not able to drive the carriage. There is a gear on the right side of the carriage and a pulley on the left side of the carriage. The spring which holds the pulley tight is missing or ...

was trying to replace ink cartridge and the belt pulley came off. How do I fix it? do you mean the belt or the pulley

pulls to one side and then gives an error message Canon Pixma Mp150 Your pulley cable might be misaligned. I once had to disassemble a printer, move the printhead to where it was supposed to be and ...

...are changed-where does it belong please Sounds like the carriage belt, it goes around a motor pulley on the far right side, and around a spring loaded idler pulley on the far left. It should ...

properly installled. You need to remove the top cover to see where it goes, there's a spring loaded pulley on one side and a motor pulley on the far other side

loose and not able to drive the carriage. There is the gear on the right side of the carriage and a pulley on left side of the of the carriage. The spring which holds the pulley tight might be broken.

the connection line for the cartridges fell off the pulleys-can't see how to get the line back on Click here.

pulley belt when the belt came off it got trapped behind the ink ports cant get fingers in to pull on belt to release it to put it back on the drive end how do i release it try long tweezers...

belt hi can you tell me how to attach the belt that comes from the cartridge to the printer and were to attach thanks michelle You have to take off the sides of the printer and re-route it over the ...

pulley belt how do i thread belt back on pulley you will need some fine needle nose pliers or some forceps where you can get into a tight spot. Replacing belts can be a chore but it is not impossible.