Canon PIXMA iP3000 InkJet Photo Printer "put new cartridge recognising" Questions

...Ink ran out whilst printing. New cartridge put in printer, but "not recognised". Cannot use printer. ...

...cartridge cannot be recognised" is shown. This is then followed by black, color or both! on different occasions. Similar messages apply when I try to scan. The cartridges are correct and I have been ...

put a chip in the cartridge to tell the printer that it is new and full. you need to tell the cartridge its been refilled. you can buy reset devices for cartridges off ebay etc. --- Please dont forget

...put in place by printer manufacturers so that you will always have to buy new cartridges. Part of it is also that print catridges are clogged if not used for sometime after its empty even after ...

...may not be installed properly, so try to remove and put it back again. if this does not work, replace it with new cartridge because maybe the one you are using is damaged. hope this helps. Good

...new ink and put it in alarm light is flashing Even if the ink level is low, you can continue printing.Press the paperfeed knob for 5 seconds. inklevel indicator will stop now. Sometimes a new (or ...

...new cartridge. Cancel all pending print jobs, then turn off the printer , remove all the ink then put them in , turn printer back on and check if you still have the same error.. If yes this can be a ...

...new ones are original canon cartridges, just refilled. When first put into the machine they worked ok, apart from not showing how much ink was left in the cartridge. However, now when I turn on the ...

yellow ink cartridge can't be recognised. replaced yellow cartridge now the printer won't recognise it. Hi, put new cartridge that is all

I can't 'unpause' the printer after putting a new coloured in k in,it doesn't recognise that the cartridge has been renewed,the result is it won't print anything Try this link. Thumbs back!