...bar set in place into slots. I removed these. I then removed the plastic inside part. You can rotate it slightly and then twist it off. Now you can look directly into the space hidden behind the ...
bar and putting the rest of the printer back together, I crossed my fingers and tried to print a picture. Tada!! It worked!! I have since printed a few more and have not had a problem yet. It may only
Question about Canon PIXMA Office Equipment & Supplies
...bar) and just leave it on-screen until you no longer need it. Turn the printer off, open the cover, remove the toner/drum unit and pull out the paper from whichever side it wil be easier (the paper ...
...space bar to activate. The next screen you will see will most likely be a Windows setup screen, when you see this press the ?R? key to get to the recovery console. It will get there, it may take a ...
BAR IN THE BACK THAT SHOWS HOW TO TAKE OUT THE JAMMED PAPER HAS A LITTLE ROD THAT FITS IN A BLANK SPACE TO THE RIGHT. IF IT IS OUT OF PLACE, THE CLOSE THE BACK COVER NOTICE COMES ON..IT IS NOT HARD TO
Question about Canon PIXMA Office Equipment & Supplies
...months ago it started this problem. It starts printing and a little bit down the page it will skip spaces then double print a line, but it looks kinda of smeared, like it was stuck to the printhead ...
1,992 questions posted
Usually answered in minutes!
2,244 Questions
2,149 Questions
1,862 Questions
1,302 Questions
1,216 Questions
