Question about Canon PIXMA Office Equipment & Supplies
...output tray is open When I try to print the yellow lite on the printer bgins to flash and a dialoge box appears that states: - Document printing cannot be executed because printer output tray is ...
Question about Canon PIXMA Office Equipment & Supplies
...disabled in US versions. Look right above the paper output tray and you will see a 6 inch long and 1.5 in wide tray sticking parrallel to the output tray.Flip it back up and you should be good to
output tray is closed After I successfully resolved the ink absorber full problem by replacing the pads inside of the machine (trust me, it's not worth your while try to clean them), I put the printer
...output tray i closed" i try to open all the paper output trays but still i get the same error. please help, is there something that i have not done? i have a pixma ip4300 i keep getting the error ...
Question about Canon PIXMA Office Equipment & Supplies
...tray, Raise the lid and scaner plate. There is a center panel above the paper output slot almost as wide as the paper, Tilt this plastic panel down, or towards yourself. The ink tray moves to the ...
Question about Canon PIXMA Office Equipment & Supplies
...output tray are open. Next open the paper output cover by rotating it down towards the output tray. The ink cartridge carrier should move to the ink replacement position on the right side of the ...
Question about Canon PIXMA Office Equipment & Supplies
...that ition of the output tray is wrong. Just keep the output tray vertical with ground as refrence, lift it and bring back to horizontal position (or vice versa by pushing it down). Regards, ...
Question about Canon PIXMA Office Equipment & Supplies
...Output Tray, and extend the Output Tray Extension. Load a sheet of A4 or Letter-sized plain paper in the Rear Tray or the Front Tray. Press the Feed Switch to select the paper source where you have ...
...output tray and top cover. Gently open the paper output tray while holding it. After confirming that the print head holder has moved to the center, open the inner cover. Remove all ink tanks. Raise ...
...output tray is closed, and it is not. I have tried opening and closing it over and over, turning it off and on, and leaving it unplugged overnight. Nothing has worked. Does this sound like a software ...
1,992 questions posted
Usually answered in minutes!
2,244 Questions
2,149 Questions
1,862 Questions
1,302 Questions
1,216 Questions
