...head from going all the way across it will generate this error. You'll want to look hard for ANY obstructions anywhere. Throughly check the gears and rollers for obstructions too. Second the code ...
Question about Canon PIXMA Office Equipment & Supplies
head alignment procedures did not help. Since the same issue has been seen when printing from different desktop PCs running different versions of Windows, as well as when copying documents, I conclude
Question about Canon PIXMA Office Equipment & Supplies
head Alignment", it prints half the page and then stops with a 5100 error. The half page that comes out has blocks that sway out of formation, blurry blocks and a white streak down the middle. Is
...error canon MX432 Chris Bell, thanks for your solution. My Canon MX432 has been blurry for a week. No amount of print head aligning / cleaning / rebooting was going to fix it. I cleaned the "timing ...
head alignment sheet E22 Carriage error E23 Paper feed error E24 Purge unit error E25 ASF(cam) sensor error E26 Internal temperature rise error E27 Waste ink absorber full or platen waste ink absorber
Question about Canon PIXMA Office Equipment & Supplies
...Error Code 5100 Solution 1: Clean the timing strip. Solution 2: The purge cap (the white sliding mechanism that the print head parks to when it's not in use) may be not lubricated well enough . ...
Question about Canon PIXMA Office Equipment & Supplies
...head alignment facility within the printer maintenance utility. This has no success in improving the alignment and sometimes produces error codes 5100 and C000. Resetting the printer also has no ...
Question about Canon PIXMA Office Equipment & Supplies
...head alignment.Fixed without taking apart. I bought my printer 2 years ago. If I turn on my Canon ip4300 printer the lights will flash and the printer freezes. Whenever I try to print anything the ...
Question about Canon PIXMA Office Equipment & Supplies
...head alignment and cleaned the heads. Normally the photos are great. I've also done a system restore after I was getting ''service error 5100'' and found no blockages. Try leaving on same settings as ...
...head alignment function, service error 5100 appears. Solution 1: Clean the timing strip. Solution 2: The purge cap (the white sliding mechanism that the print head parks to when it's not in use) may ...
1,992 questions posted
Usually answered in minutes!
2,244 Questions
2,149 Questions
1,862 Questions
1,302 Questions
1,216 Questions