Question about Canon PIXMA Office Equipment & Supplies
...half of pgbk band doesn't print when i print out the nozzle test pattern, the "pgbk" band only prints the top half but the entire bottom half is blank. Any ideas? First try doing a deep head cleaning ...
...PGBK 5. It skips leaving wide horizontal blank lines on the printout. The test page for this cartridge looks fine for the top half, but bottom half is blank. It seems that it may be printing fine in ...
...PGBK with grid next to it, C with black bars has blue band next to it, C with yellow bars has no colour next to it (which is the same with the M with yellow bars) and the BK with black bars has grey ...
...PGBK several times. When I print a "Printer Test Page" the density of the black letters starts out O.K. and becomes "fly speced" by the bottom of the page. Any sugestions? Make sure you are using ...
...half of PGBK grid was missing horizontal lines. Took out the print head and soaked and ran it under the tap. Dried off with hairdryer and replaced. Did test print - which was really good (although ...
...PGBK black ink will not print, have replaced tank, have done clean and deep clean. Will not print out on nozzle check either. This should not be a problem normally. I have 6 canon printers using BCI ...
Question about Canon PIXMA Office Equipment & Supplies
...pgbk ink tanks is installed. i lift the cover, the ink tank is blinking; i take it out, put it back in and the blinking stops. half the time, it then prints, but half the time i have to do this again ...
1,992 questions posted
Usually answered in minutes!
2,244 Questions
2,149 Questions
1,862 Questions
1,302 Questions
1,216 Questions
