Question about Canon PIXMA Office Equipment & Supplies
ccd unit inside the scanner, a position sensor, a motor or a wire harness. The latter two are fairly unlikely, the first two more likely. Most probable is the CCD unit. I don't think Canon sells it as
Question about Canon Office Equipment & Supplies
...sensor mechanism. It replaces the CCD scan head altogether. Instead, the CIS uses rows of red, green, and blue L.E.D.s and image sensors (between 300 and 600) that cover the entire width of the ...
scanner CCD sensor system error e225 Sir, there is an error i.e system error e225 in my canon mf 4350d machine I cn,t copy more then one time please help me shut out this problem what is CCD senser?
...ccd sensor is under the glass cover and obviously is free form dust/ dirt. On the other hand if you use the feeder the ccd sensor is located in between the roller assembly (not sure exactly for this ...
Question about Canon Office Equipment & Supplies
...is tight, home sensor has been cleaned. had this alot your a tech i assume ? if so replace the lens/ccd assy and the ip board if you have a scrap 210 replace the two together that will fix your ...
Question about Canon PIXMA Office Equipment & Supplies
...CCD sensor board or a problem with the scanner lamp. Try turning the machine off for five minutes then turn back on. If this does not work you probably would need a technician to check your
Question about Office Equipment & Supplies
...sensor; replace the exposure lamp or inverter pcb if needed; replace CCD unit or engine/main board if applicable Hello sir; Here are some problem; exposure lamp, CCD, shading plate position, engine ...
Question about Canon PIXMA Office Equipment & Supplies
...sensor. I get persistent error messages saying document jam clear scanner and there is no jam. Brother Error CodesRAM clear (most models) Quickly press function * 2 8 6 4 Display should read ...
sharp AR-M280N shows L04-02 service code check home position sensor, main board, scanner motor, cable harness. ccd unit scanner sensor all connectors the optics reset eror
dark copies from platen glass if the problem is just from the glass , you have a bad CCD sensor or bad board in the scanner bar. and in that case u must take the printer for service. sorry Fosg2000
1,992 questions posted
Usually answered in minutes!
2,244 Questions
2,149 Questions
1,862 Questions
1,302 Questions
1,216 Questions
