Canon PIXMA iP90 InkJet Printer "replacing printhead" Questions

...replacing the printhead, check your printhead if any smoke smell or indication of short circuitry present. Replacing the printhead in this case will harm new printhead. You'd better to take your ...

error 5200 on start up of Cannon MP830 printer Error 5200 on the MP830 is for a printhead temperature warning. The Canon service manual suggests two causes of action. Firstly replace the printhead or ...

error message u052 my wife pulled out a paper jam from my canon pixma mp600 and since then the lcd screen says ...printhead error u052. Should I try and replace the printhead? That is a printhead ...

i am getting error code B200 on my Canon Pixma MP 620 printer B200 IS BAD PRINTHEAD. i TRIED TO CLEAN CLOGS BUT IN THE END THE FIX WILL BE TO (REPLACE PRINTHEAD) IF UNCLOGGING PRINTHEAD OF DRY INK ...

my printer shows message "put in cartridge" I have taken out and replaced, unplugged all connectionsn& replace. nothing works. what should I do? I have a canon pixma mp 130 elaine That error is ...

...tissue.5. Reinstall the printhead carefully.6. Check to see if the printhead is accepted.If this doesn't help it may be that the printhead has developed a genuine fault and will need

error code uo52 how to reset This indicates and error with the printhead. lull out the printhead and reseat it. If the message persists, you will need to replace the printhead. Normally, the error ...

printer won't print black ink even with new cartridge hello, have you pulled out printhead, and using wet paper towel, set the printhead down on printhead area to see if inks are coming out. the black

My Canon mx850 says the print head is incorrect The printer was working fine for the first three weeks. Now I turned it on this morning and it sends me the message that the print head is incorrect. It

the printer is tell me to ionstall the pint head the printer is telling me to install the pint head Assuming that you have actually read or looked at the installation instructions and been using this ...