Canon Pixma MP450 All-In-One InkJet Printer "paper message" Questions

...paper jammed" message, but there I keep getting a "paper jammed" message, but there is no paper jammed in the printer This error message is displayed by the printer when paper is jammed in ...

paper. To stop the message, open and close the top most cover of the printer. Lastly, verify the flags and the sensors. If the problem persists, the cause of the error message could be a broken sensor

...paper jam message and I can't see any paper bits anywhere. Trying to open the machine from the back to look inside. Have removed the 4 screws on the back and still can't remove back panel. Are there ...

Paper Jammed Message I had a paper jam and pulled the paper out of the top. Paper was in tack but now the peper jam message and alarm stays activated. I have tried to clear the paper jammed message ...

paper. To stop the message, open and close the top most cover of the printer. Lastly, verify the flags and the sensors. If the problem persists, the cause of the error message could be a broken sensor

paper. To stop the message, open and close the top most cover of the printer. Lastly, verify the flags and the sensors. If the problem persists, the cause of the error message could be a broken sensor

paper message My fairly new - about six weeks psc has suddenly developed a dramatic graunching noise and an out of paper message, even though there is plenty of paper in the tray. What should I do ? I

message: Paper Output Slot The paper is jammed clear the paper and press OK I cannot find any visible paper jam, yet I cannot clear the error. Any suggestions?? SOMETHING MOST LIKELY FELL DOWN IN BACK

...paper from lower cassette. Error message states no paper in upper cassette Paper in lower cassette. Error message estates no paper in upper cassette you have to change the printer settings on the ...

...can be the problem? I cannot receive faxes or print anything. The message says that "there is no paper in the machine". There us plenty of paper in the machine and I push "OK" and get the same ...