Question about Canon SELPHY Office Equipment & Supplies
The selphy takes the paper from the front all the way out the back before it starts printing. If it doesn't go in, you may need to clean the roller in the front with a damp towel so it can grab better
...begin printing and then stops. The light on the printer turns red and the computer screen reads: "Paper-feed error. Check that the paper is correctly loaded in the paper cassette and that the paper ...
Question about Canon SELPHY Office Equipment & Supplies
...a paper tray for canon cp730 Best answer go to ebay and purchase a bad printer with good tray this will solve your problems, not an available;e part from what i gather unless you have a model
...Paper cartridge checked and replaced. Cannot send jobs to print, nor read SD card from camera. Prior to this the printer was working well. remove all the connection go to control pannel printer and ...
Question about Canon SELPHY Office Equipment & Supplies
...go by the physical amount of toner. I know it sounds confusing but let me explain. When the cartridge is first filled with toner, the manufacturer knows how much toner they put into it and they ...
Question about Canon SELPHY Office Equipment & Supplies
...at the same time turn the printer power on. When the Toner light is on by itself, release the Go button. Push and hold the Go button again, release the Go button when the Paper light is on by
Question about Canon SELPHY Office Equipment & Supplies
...any paper from inside the printer. • Make sure the paper in the tray is free of tears or creases. • Make sure you do not overload the paper tray. For more information, go to ...
...paper here and that doesn't go though machines easily unless the paper feed is from the back. HP printers traditionally roll the paper around a roller and feed it back on itself. This paper (it's ...
Question about Tally Office Equipment & Supplies
...paper Have to enable techmode (go offline and hold the line feed and enter button for three seconds) then go into the test menu and do the fault override and turn off paper out sensor and then must ...
paper getting jamed the paper is going through but it going n almost sideways and the paper is getting wrinkled Check the paper road.May have something drop there. Clean all the rollers with a damp ...
93 questions posted
Usually answered in minutes!
58 Questions
19 Questions
29 Questions
11 Questions
7 Questions